lang="en-US"> Digital Signage FAIL: Did I get the wrong bracket? - Digital Signage Blog
Digital Signage Blog

Digital Signage FAIL: Did I get the wrong bracket?

I decided to create a new topic for this blog called Digital Signage FAIL that showcases what can go wrong if you don’t use the right company or when businesses decide to go DIY. We will not be naming any companies/businesses or the location of where the photo’s were taken but we just want to highlight what went wrong, possible ways to remedy the problem and how to possibly avoid the same issue.

So to kick off the first post, have a look at this picture:

FAIL FEATURES

If you look at the bracket, it is much wider than the screen. The bracket sticks out on both sides of the screen which makes the solution look very unprofessional. FAIL!

SUGGESTIONS/RECOMMENDATIONS

Replace to a larger screen.

Measure the screen and ensure that the width of the screen is longer than the bracket, whether the screen is installed in landscape or portrait.

If you have seen or would like to share a FAIL photo with the rest of the digital signage community please send it to info @ digitalsignageblog.com

Please also include the FAIL FEATURES and SUGGESTIONS/RECOMMENDATIONS
NOTE: We will not be naming any companies/businesses or the location of where the photo’s were taken but we just want to highlight what went wrong, possible ways to remedy the problem and how to possibly avoid the same issue.

LIKE WHAT YOU'VE READ?

When you subscribe you will also join other Digital Signage readers who receive our content right in their mailbox. Good luck!

Our Sponsors

Exit mobile version