This weekend I thought I’d play around with the Nikon D60 Digital SLR camera and test my skills in trying to take those “awesome” shots. Now, since we’re in the digital signage industry I thought I’d take photos of something relating to this industry (basically anything I had lying around) and here’s what I could find:

	High Definition Set Top Box and DVD player. Both were connected to a rear projector screen.
	S-video cable – this is becoming almost obsolete but you’ll be surprised on how many digital signage players are actually using this type of connectors
	Short VGA cable – at Advertise Me, we like to make sure all cables are to the correct lengths

I also took several photos of a vegetarian place I went to called Zen Oasis in Berrima Australia. We have a strong belief in our company that “a healthy body and mind allows one to achieve higher levels of growth”. The food was awesome and the environment was tranquil and peaceful. If you’re around that area, I highly recommend that you visit this place (make sure you book in advance as it’s always busy). Here’s a few photos that I took:  (by the way, I’ve had no lessons on photography so apologies if they look amateur).

	As soon as you walk into the restaurant you are greeted by this statue. For this particular photo I thought it would look good if the focus was on the flowers and this was the result.
	This is an all you can eat (just make sure you don’t waste the food) and there was so much variety. Yum… can’t wait to go there again.
	I think this is an “Awesome” shot. There is a stage with a piano surrounded by an aura of stillness.
	This picture was outside the Zen oasis restaurant that showcases a big tree with a wishing well.

Tweet This Post

Category: Digital Signage Weekend Fun

We’ve been pretty busy working on a project and slacked off in posting blog entries. We’ll hopefully post information about the project that we are working on at a later stage but we thought we’d mention how digital signage is everywhere. We recently walked in the busy streets of Bondi junction Australia and noticed how common it was for businesses to have display screens in their stores. The majority of these shop were displaying content from a DVD player, or showing live TV whilst others were actually displaying in house advertisements.

One thing that I noticed was that even thought Mothers day was approaching, not many businesses had any relevant messages relating to this event. Even today, being mothers day, businesses were not using digital signage to their advantage. Oh well maybe its just Australia… My thinking is that maybe one day, businesses will be educated and skilled in the digital signage technology to update and stay connected with their audience.

Tweet This Post

Category: Digital Signage Blog Info

This week, our team thought of doing something different from our usual postings – we decided to open up the NDSP-500 digital signage player and give you a brief look at what’s inside one of these players. The video is not of the greatest quality but it does give you an idea of the components inside a typical digital signage player and what connections are available. So here’s the video:

As you can clearly see, the unit is small… it’s smaller than half of an A4 paper. With this particular unit, there are several connectors at the front:

1. RS232 – this is usually to provide serial communications with another device. It can be used to control and manage an display screen – that’s if the screen supports RS232.
2. Secure compartment to store the SD card – it’s also a quick way to easily swap out the SD card without having to open up the box

At the back of the unit you will notice the following connectors:

1.Video output:  the unit has these typical connections – S-Video Output/Composite Video and Audio, DVI, and VGA.

2. Video Input: Composite Video and Audio. With this particular unit you will be able to connect a video input source such as a DVD player, Foxtel, CCTV camera etc.

3. S/PDIF – for great audio quality

4. LAN port which support 10/100 Mbps

5. Two USB ports for connecting USB Storage

6. Power plug to connect the power supply. This power plug was different from other digital signage players we’ve seen in the past. It basically has a connector which allows you to twist and screw the power cable to the power plug.

Inside the player, all you will find is a circuit board, a frame for a small hard disk and several cables. As you can see from the video, you will not find a fan inside the player – this makes the unit very quiet when it’s turned on.

Would you like to see more videos? Let us know what you’ll like to see and we’ll try to get it done.

Feel free to submit your answer as a comment.

Tweet This Post

Category: Digital Signage Blog News, Digital Signage Blog Products, Digital Signage Blog Video