Newsletter subscribe

Fail

Digital Signage FAIL: Is it going to drop?

Please Don't Fall
Posted: March 7, 2014 at 5:05 pm   /   by   /   comments (0)

We received this picture and the quality isn’t the greatest but it was quite important to post it here. In this picture you will see the flange for the ceiling pole not installed tightly to the ceiling. This gives the impression the screen and the pole has dropped by a few centimetres which in actual fact it hasn’t. It can be quite hazardous and fatal if it did, so every installer needs to cautious and make sure the pole is securely installed to a concrete ceiling or a structural support.

Please Don't Fall

Please Don’t Fall

FAIL FEATURES

Flange not securely tightened

SUGGESTIONS/RECOMMENDATIONS

Securely tighten the flange before leaving site

Test to make sure the ceiling pole can support the weight

If you have seen or would like to share a FAIL photo with the rest of the digital signage community please send it to info @ digitalsignageblog.com

Please also include the FAIL FEATURES and SUGGESTIONS/RECOMMENDATIONS
NOTE: We will not be naming any companies/businesses or the location of where the photo’s were taken but we just want to highlight what went wrong, possible ways to remedy the problem and how to possibly avoid the same issue.

LIKE WHAT YOU'VE READ?

When you subscribe you will also join other Digital Signage readers who receive our content right in their mailbox. Good luck!

digital signage blog logo

Our Sponsors

Comments (0)

write a comment

Comment
Name E-mail Website